This page provides a sample software download service for the M470 group.
Please check the target product and function list, and download the appropriate file.
Motor Software Development Kit for SBK-M471-KIT
Function | Description |
---|---|
Brushless DC Motor Control |
|
TMPM471 Development Kit: SBK-M471-KIT
Basic operation of peripherals
Sample Software/Function | Description | |
---|---|---|
Analog/Digital converter | ADC | A program that will display the value , which is measured voltage from a potentiometer. |
Advanced Encoder Input Circuit | A_ENC32 | The rotation is detected by the rotary encoder in the encoder mode. The LED blink frequency depends on the count value. |
Clock/Mode control | CG | Switch to the Low Power Consumption Mode (IDLE/STOP1) by the push SW port input as a trigger. Turn on and off the LED depending on the Operation Mode. |
CRC | CRC | Communication with CRC code is added between 2 TSPIs and the received data is output to terminal software. |
Digital Noise Filter | DNF | This sample software detects the external interrupt signal that is generated by the switch via the DNF. |
Serial Bus Interface | EI2C | Sample software is communication sample between 2 evaluation boards. And multi master sample software that read EEPROM using 2 evaluation boards. |
Flash Control | FLASH | 1. Example of running a program in the internal RAM and performing delete and rewrite of the internal flash memory. 2. Example of rewriting the user information area of code flash memory. |
Voltage Detection Circuit | LVD | This sample software compares the supply voltage with the detection voltage. |
Oscillation Frequency Detector | OFD | This sample software detect error of external high speed oscillator by compare to set frequency width. |
I/O port | PORT | Key presses are determined by polling process to turn on (turn off) the LED. |
RAM Parity | RAMP | Add RAM parity to the character string input using the write command from the terminal software and save it in the RAM. Do a parity check on the data saved in RAM with the Read command and display it to the terminal software. |
Clock Selective Watchdog Timer | SIWDT | Example in which an NMI interrupt occurs and an example in which the clear code is periodically written and an NMI interrupt does not occur. |
32-bit Timer Event Counter | T32A | 1. A clock frequency input from outside is measured using the capture function. 2. Example of using the timer interrupt to turn on/off the LED every second. 3. Output example of duty-variable PPG (programmable square wave). |
Trimming Circuit | TRM | The frequency of the internal high-speed oscillator is adjusted using an external reference signal. |
Serial Peripheral Interface | TSPI | It communicates using 2 ch TSPI and outputs data to terminal software. |
Asynchronous Serial Communication Circuit | UART | 1. Example of receiving the character string from a terminal emulator. 2. Example of sending the character string to a terminal emulator. |
TMPM4KN Development Kit: SBK-M4K4B-KIT
* Arm and Keil are registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
* IAR Embedded Workbench is registered trademark owned by IAR Systems AB.
* SEGGER Embedded Studio is a trademark of SEGGER Microcontroller GmbH.
* Other company names, product names, and service names may be trademarks of their respective companies.
* All brand names and product names are trademark or registered trademark of their respective companies. Information contained herein might be changed or updated without notice.