This page provides a sample software download service for the TLCS-870/C1 Series and TLCS-870/C1E Series.
Please check the target product and function list, and download the appropriate file.
Please check the target product.
TMP89Fx : TMP89FS60B / TMP89FS62B / TMP89FS63B
Function list for sample software.
Function | Description | Product Name | ||
---|---|---|---|---|
TMP89 Fx |
TMP89 FWy |
|||
10-bit AD Converter | ADC REPEAT |
The analog input value is AD-converted 10 times, and the average result is displayed on a terminal emulator. | V | V |
ADC SINGLE |
The analog input value is AD-converted once, and the result is displayed on a terminal emulator. | V | V | |
Divider Output | DVO | By selecting a frequency of the divider output, pulse waves are output. | V | V |
External Interrupt control circuit | EXT_INT | The port input by switch triggers the generation of the external interrupt. An LED turns on when the external interrupt is detected. | V | V |
Flash Memory | FLASH MCU_BOOTROM |
In MCU mode, this sample software applies Security Program and writes test data using a support program (API) provided in the BOOTROM. | V | |
FLASH MCU_ProductID |
In Product ID mode, this sample software reads the vendor ID, flash ID and security status from the flash memory and displays them on a terminal emulator. | V | ||
FLASH MCU_RAM |
In MCU mode, the control program is transferred to the RAM and writes or reads test data. | V | V | |
FLASH MCU_SHADOW_BOOTROM (External) |
This sample software rewrites a program transferred from an external control board using a support program (API) provided in the BOOTROM and shadow RAM. This sample is for the external control board. | V | ||
FLASH MCU_SHADOW_BOOTROM (Sample) |
This sample software rewrites a program transferred from an external control board using a support program (API) provided in the BOOTROM and shadow RAM. This sample is for the target board. | V | ||
FLASH SPROM_UART |
The sample software of an external control board writes or reads test data on the target board through UART communication. | V | V | |
Key-on Wakeup | KWU | The NORMAL1 and STOP modes are switched by pushing down a switch, and the LED display is also switched according to the operation mode. | V | V |
LCD | LCD | The values from 0 to 999 are counted up per second and displayed on the LCD. | V | |
Operation mode control circuit | LOW_POWER NORMAL1/NORMAL2/SLOW1 |
The operation mode is changed by a switch input. An LED turns on or blinks according to operation modes. | V | V |
I/O Ports | PORT | When a switch is pushed down, an LED turns on. When the switch is released, the LED turns off. | V | V |
Real Time Clock | RTC | An LED repeats turn on/off each interrupt cycle of the real-time clock (RTC). | V | V |
Serial Bus Interface | SBI | By a command input (via UART) from a terminal emulator of a PC, the sample software executes the following: 1. The Master mode setting 2. Transmission of one byte of test data to the Slave side. 3. Transmission request of the test data to the Slave side. The Slave side transmits the test data, when it receives the transmission request. |
V | V |
Shadow RAM | SHADOW_RAM COPY |
This sample software transfers the shadow RAM copy program to the internal RAM. | V | |
SHADOW_RAM POWER_CUT |
This sample software turns off/on the power supply of the Flash memory from the shadow RAM | V | ||
Synchronous Serial Interface | SIO 8bit_RECEIVE |
One byte of test data received from the board in the transmit mode is displayed on a terminal emulator. | V | V |
SIO 8bit_TRANS |
One byte of test data is transmitted by the command input (via UART) from a terminal emulator of a PC. | V | V | |
SIO 8bit_TRANS_RECEIVE |
This sample software uses two evaluation boards that have the program. When one of the boards transmits one byte of test data, the other receives it and displays it on a terminal emulator. | V | V | |
Time Base Timer | TBT | An LED repeats turn on/off each interrupt cycle of the time base timer (TBT). | V | V |
8-bit Timer Counter | TC0 8bit_EVENT_COUNT |
In the 8-bit event counter mode sample, an LED repeats turn on/off per setting cycle by using the timer interrupt. | V | V |
TC0 8bit_PPG |
In the 8-bit programmable pulse generation (PPG) output mode sample, the frequency and duty ratio are changed by a switch input. | V | V | |
TC0 8bit_PWM |
In the 8-bit pulse width modulation (PWM) output mode sample, the frequency and duty ratio are changed by a switch input. | V | V | |
TC0 8bit_TIMER |
In the 8-bit timer mode sample, an LED repeats turn on/off each interrupt cycle of the 8-bit timer. | V | V | |
TC0 12bit_PWM |
In the 12-bit pulse width modulation (PWM) output mode sample, the frequency and duty ratio are changed by a switch input. | V | V | |
TC0 16bit_EVENT_COUNT |
In the 16-bit event counter mode sample, an LED repeats turn on/off per setting cycle by using the timer interrupt. | V | V | |
TC0 16bit_PPG |
In the 16-bit programmable pulse generation (PPG) output mode sample, the frequency and duty ratio are changed by a switch input. | V | V | |
TC0 16bit_TIMER |
In the 16-bit timer mode sample, an LED repeats turn on/off each interrupt cycle of the 16-bit timer. | V | V | |
16-bit Timer Counter(TCA) | TCA EVENT_COUNT |
In the event counter mode sample, an LED repeats turn on/off each interrupt cycle of the TCA timer. | V | V |
TCA EXT_TRIG |
In the external trigger timer mode sample, an LED repeats turn on/off each interrupt cycle of the TCA timer. | V | V | |
TCA PPG |
In the PPG output mode sample, the remote control waveform is output with a 200 msec cycle. | V | V | |
TCA PULSE_WIDTH_MEASURE |
In the pulse width measurement mode sample, the measured value of input pulse width is displayed on a terminal emulator. | V | V | |
TCA TIMER |
In the timer mode sample, an LED repeats turn on/off each interrupt cycle of the TCA timer. | V | V | |
TCA WINDOWS |
In the window mode sample, an LED repeats turn on/off each interrupt cycle of the TCA timer. | V | V | |
16-bit Timer Counter(TCB) | TCB PPG |
In the PPG output mode sample, the remote control waveform is output with a 200 msec cycle. | V | |
10-Bit Timer/Counter | TCC PPG_DUTY_50 |
A waveform whose duty ratio is 50% is output. | V | |
TCC PPG_DUTY_CHANGE |
A waveform having the specified pulse widths is output. | V | ||
TCC PPG_DUTY_INDEPENDENT |
The waveforms having the specified pulse widths for each of the PPGC01 and PPGC02 pins are output. | V | ||
TCC PPG_EMG |
An LED turns on when an emergency PPG output stop input is accepted. When the emergency PPG output stop state is released, an LED turns off. | V | ||
Asynchronous Serial Interface | UART | Each character input is echoed to a terminal emulator as it is entered. | V | V |
UART IrDA |
Test data in infrared data format (IrDA) are output with 100 msec cycle. | V | V | |
Voltage Detection Circuit | VOLT_DETECT | Falling of the power supply voltage is detected, and LED patterns corresponding to the detected voltage are set. | V | V |
Watchdog Timer | WDT | When the clear code is written regularly, all LEDs blink. | V | V |
SP No. | Module Name | Outline |
---|---|---|
SP-870-101 | - | The operational function of the TMP89FS60FG Sample Software
|
SP-870-102 | RAM, Memory | Self-Diagnostic Testing Sample Software |
Please Select the appropriate file for download.