Part Number Search

Cross Reference Search

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

Keyword Search

Parametric Search

Stock Check & Purchase

Select Product Categories

IEC 62368-1 Safety standard certification

IEC62368・UL2367 standard certification

IEC 62368-1 is an internationally accepted standard that specifies safety requirements for consumer and telecommunications equipment. Toshiba eFuse ICs have obtained certification for the latest standards. This feature simplifies the single-unit failure modes (Single-fault tests) of the rear-stage ICs and reduces maintenance costs by replacing conventional fuses.

One of  the Toshiba eFuse ICs benefit  is IEC 62368-1 certification. If the certification has been obtained, it is unnecessary to perform single-fault tests of subsequent ICs (PMIC and MCUs in the figure above). Therefore, it is possible to quickly and easily obtain certification of safety standards as equipment at the start-up of production.

Contacts

Technical inquiry

Contact us

Contact us

Frequently Asked Questions

FAQs

Queries about purchasing, sampling and IC reliability

Stock Check & Purchase

keyword:

A new window will open