Part Number Search

Cross Reference Search

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

Keyword Search

Parametric Search

Stock Check & Purchase

Select Product Categories

Operation of Switching Regulators

Buck converter
The figure below on the left shows the motion image. A rectangular wave is created by MOSFET repeating ON/OFF. This wave is applied to the coil. A desired DC voltage can be obtained by smoothing (averaging) this rectangular wave. The output voltage value is determined by the duty ratio of the rectangular wave.

Boost converter
As the figure below on the right shows, when the MOSFET is ON, current mainly flows through the coil and the MOSFET. At this time, energy is accumulated in the coil. The coil operates so as to release the accumulated energy and suppress the change of the current. When the MOSFET turns OFF, the current flowing through the coil will lose the path up to now. However, due to the property of continuing the current of the coil, the voltage at the coil end rises and the current flows through the diode and the capacitor is charged. This causes voltage exceeding the input voltage to be generated.

Buck converter
Buck converter
Boost converter
Boost converter

Chapter IV : Local Power Supply ICs

Power Management IC
Example of Power Line Structure in a System
Why POL Supply ICs Are Wanted?
Types of Local Power Supply ICs
Operation of Linear Regulators
Functions of LDO
Load Switch IC
Functions of Load Switch IC

Related information

A new window will open