Part Number Search

Cross Reference Search

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

Keyword Search

Parametric Search

Stock Check & Purchase

Select Product Categories

How does thermal shutdown(TSD) of eFuse IC (electronic fuses) work?

Thermal ShutDown(TSD: overheat protection) is the function that MOSFET inside is shut down when the junction temperature of eFuse IC rises to the set value.
Auto-retry type is that MOSFET turns on again when MOSFET shuts down and the junction temperature drops to the setpoint.
Latch type is that MOSFET is kept shut down after eFuse IC junction temperature has risen and TSD has been activated. Releasing the latch is performed by applying a reset by EN/ UVLO signal.

The figure below shows the operation image of the auto-retry type TSD function (TCKE8 series).

TSC Function Operation (Auto-retry type for TCKE 8 series)
TSC Function Operation (Auto-retry type for TCKE 8 series)
A new window will open