Part Number Search

Cross Reference Search

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

Keyword Search

Parametric Search

Stock Check & Purchase

Select Product Categories

Can eFuse IC (electronic fuse) be used for hot-swap (hot-line insertion/extraction)?

eFuse IC can use for hot-swap/hot-plug.
Furthermore, the protection performance can be improved by combining the eFuse IC and the Zener diode.

The connectors of USB and HDMI are plugged in and unplugged while the terminals are power on.
In addition, servers and storage systems such as data centers cannot be powered off when a failed board or HDD is replaced.
eFuse IC protects the system from overcurrents and overvoltages that occur when hot-swap/hot-plug do.

Hot-swap/hot-plug example

 

A new window will open