Europe (EMEA)

Part Number Search

Cross Reference Search

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

Keyword Search

Parametric Search

Stock Check & Purchase

What is reverse-current blocking using external back-to-back MOSFETs?

Back-to-back connection
Back-to-back connection

Two N-channel MOSFETs are externally connected back-to-back (in a common-source configuration or a common-drain configuration) when a load switch using a gate drive IC needs a function for blocking the current flowing into the load switch in the reverse direction. This function is called reverse-current blocking.

Power multiplexer circuit

Power multiplexer circuit with 2 input and 1 output is implemented on a small PCB.
Please visit and download below for more detail

Power multiplexer circuit