Products
Knowledge
This webpage doesn't work with Internet Explorer. Please use the latest version of Google Chrome, Microsoft Edge, Mozilla Firefox or Safari.
require 3 characters or more.
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
require 3 characters or more.
For TCKE8 Series, when the input voltage of the VIN pin of the eFuse IC exceeds the overvoltage clamp value (OVC) , the output voltage VOUT is limited to the over voltage clamp value(OVC) so that the overvoltage is not applied to the subsequent IC or circuits.
Please check the data sheet for details as it depends on the product.
There are two types of overvoltage protection functions:
Please check the data sheet for details as it depends on the product.