- 型號查詢
- 交叉搜尋
- 關鍵字搜尋
- 參數搜尋
- 線上庫存查詢跟購買
This webpage doesn't work with Internet Explorer. Please use the latest version of Google Chrome, Microsoft Edge, Mozilla Firefox or Safari.
型號需要超過三個文字以上
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
型號需要超過三個文字以上
Linear ICs
Operational Amplifier ICs
- What is an op-amp?
- What types of op-amps are available?
- What types of amplifier circuits can be configured using an op-amp?
- Why is feedback used in op-amps?
- What are open-loop and closed-loop gains of an op-amp?
- For what applications are op-amps used?
- What is the purpose of using a differential amplifier? (Common-mode rejection ratio: CMRR)
- Characteristics of op-amps (What is the ideal op-amp?)
- What is the input offset voltage of an op-amp?
- What is the virtual short-circuit (virtual ground) of an op-amp?
- What is the maximum frequency at which an op-amp can be used?
- Is it necessary to connect bypass capacitors to the power supply terminal of an op-amp?
- Is there any way to amplify a signal with a voltage close to the power supply level?
- What types of noise affect an op-amp?
- Are there any considerations for using an op-amp at low voltage?
- What is the common-mode input voltage of an op-amp?
- What does rail-to-rail mean?
- How can I provide hysteresis (schmitt trigger) for a comparator?