TXZ4A+系列

Motor microcontroller for 3 motors synchronous control at 160-MHz drive

• Arm Cortex-M4 core with FPU, operating at up to 160MHz
  • Based on the industry de facto standard Arm Cortex-M core.
• Wide range of memory and package lineup
  • 128 to 1024KB code flash and 32KB data flash with 100k write cycles endurance
  • the Products within 1MB code flash allows instructions to be read from one area, while the updated code is programmed into the other area in parallel by two separate areas of 512KB.
  • 24 to 64KB SRAM
  • Package line-up (64 to 100pin)
• variety of motor control applications including both home appliances and industrial equipment
  • 2.7 to 5.5V supply and -40 to 105C operating temperature
  • Self-diagnosis functions supporting functional safety certification according to various standards (IEC 60730 class B and others)
• Capable of 3-motor control
  160-MHz drive CPU and 3 AD converters, 3 advanced programmable motor control circuits (A-PMD),  and evolved vector engine "advanced vector engine plus (A-VE+)" for motor control are incorporated,  enabling realizing 3-motor control even in the 64-pin class.
• Incorporating high-resolution advanced encoder (A-ENC32) suitable for AC servo motor
  The A-ENC32 circuit allows direct input of the signals of an incremental encoder and a hole sensor. Moreover, the accuracy of the position detection angle is improved by setting 32-bit width of encoder count values. Therefore, this circuit can control the servo motor control.

• Built-in high-speed oscillator, equipped with oscillation accuracy +/-1% (operating temperature -40 to 105C)
  By improving the oscillation accuracy, the number of parts can be reduced by eliminating the need for an external oscillator.
• Both code flash and data flash are rewritable up to 100,000 times
  
• A wide line-up of package variations 5 package line-up is provided, covering from small scale application (64-pin) to high-end application (100-pin).

Motor microcontroller equipped with CAN controller for 3 motors synchronous control at 160-MHz drive

• Arm Cortex-M4 core with FPU, operating at up to 160MHz
  • Based on the industry de facto standard Arm Cortex-M core.
• Wide range of memory and package lineup
  • 128 to 256KB code flash and 32KB data flash with 100k write cycles endurance
  • 24KB SRAM
  • Package line-up (64 to 100pin)
• variety of motor control applications including both home appliances and industrial equipment
  • 2.7 to 5.5V supply and -40 to 105C operating temperature
  • Self-diagnosis functions supporting functional safety certification according to various standards (IEC 60730 class B and others)
• Capable of 3-motor control
  160-MHz drive CPU and 3 AD converters, 3 advanced programmable motor control circuits (A-PMD), and evolved vector engine "advanced vector engine plus (A-VE+)" for motor control are incorporated, enabling realizing 3-motor control even in the 64-pin class.
• Incorporating CAN controller suitable for industrial networks
  In addition to motor control, it makes it easy to support IoT.
• Incorporating high-resolution advanced encoder (A-ENC32) suitable for AC servo motor
  The A-ENC32 circuit allows direct input of the signals of an incremental encoder and a hole sensor. Moreover, the accuracy of the position detection angle is improved by setting 32-bit width of encoder count values. Therefore, this circuit can control the servo motor control.

• Built-in high-speed oscillator, equipped with oscillation accuracy +/-1% (operating temperature -40 to 105C)
  By improving the oscillation accuracy, the number of parts can be reduced by eliminating the need for an external oscillator.
• Both code flash and data flash are rewritable up to 100,000 times
  By high level resilience to repeated data write and erase, it is possible to eliminate the need for external memory.
• A wide line-up of package variations 5 package line-up is provided, covering from small scale application (64-pin) to high-end application (100-pin).

具有高速資料處理性能的網通型MCU，支援各種定時器以及通訊通道

• 支援FPU的Arm Cortex-M4核心，最高工作頻率可達200MHz
• 廣泛的記憶體和封裝產品線
  • 512KB至2048KB程式快閃以及32KB資料快閃記憶體，均能寫入10萬次
  • 具有奇偶校驗位的256KB SRAM加2KB備份RAM
  • 封裝陣容（100至177引腳）
• 內建各種介面和通信通道，適用於影音設備以及MFP所需之高速資料處理。
  • 串列記憶體介面（支援Quad／Octal SPI）、音訊介面（I²S）以及外部匯流排介面
  • 可編程馬達驅動電路（PMD）
  • 採用多組DMA控制器以及獨特匯流排矩陣的高速率通信
  • 可支援獨立設定取樣時間以及保持時間的類比數位轉換器
  • 數位類比轉換器

• 內建振盪精準度達±1%的高速振盪器（工作溫度：-40至85℃）
• 客戶能利用高精準度振盪器，不需外加振盪器並可減少零件使用數量。

• 程式以及資料快閃記憶體都能被寫入10萬次

  客戶能利用高耐性快閃記憶體，不需外接記憶體。

Connectivity MCU with high speed data processing, wide variety of timers and communication channels optimizes for IoT devices, equipped with Ethernet, USB, and CAN controller

• Arm Cortex-M4 core with FPU, operating at up to 200MHz 
  
• Wide range of memory options and package line-up (100 to 177pin)
  • 512 to 2048KB code flash and 32KB data flash with 100k write cycles endurance
  • 128 to 256KB SRAM with parity plus 2KB backup RAM
• Various built-in interfaces and communication channels suitable for high-speed data processing required for AV equipment, MFPs, and Factory Automations.
  • 10/100 Ethernet controller (MII,RMII)
  • Universal Serial Bus (USB Rev 2.0 FS OTG controller with integrated PHY)
  • 2 CAN controllers
  • Serial memory interface (supports Quad/Octal SPI), audio interface (I²S) and external bus interface
  • Programmable Motor Driver (PMD) for optionally controlling brushed or brushless motor
  • High throughput communication with multiple DMA controllers and unique bus matrix
  • 16-24 Analog-to-digital converter, supporting individual sample and hold time setting for each channel
  • 2 Digital-to-analog converter
  • Incorporating additional Remote control (RMC), Consumer Electronics Control (CEC)

• Built-in high-speed oscillator, equipped with oscillation accuracy +/-1% (operating temperature -40 to 85℃)
  By improving the oscillation accuracy, the number of parts can be reduced by eliminating the need for an external oscillator.
• Both code flash and data flash are rewritable up to 100,000 times
  By high level resilience to repeated data write and erase, it is possible to eliminate the need for external memory.