型號需要超過三個文字以上
About information presented in this cross reference
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
儲存產品目錄
選擇應用
Find everything you need for your next product design. Simply select an application and click through to the block diagram to discover our semiconductor solutions.
新產品/新聞
Part Number | Package | Output Current | Power Supply | Recommended Applications | Features & Functions | Rel. Level |
---|---|---|---|---|---|---|
P-QFN28-0606-0.65-001 | ±5.0 A | BATT | Open/close control for engine throttle and other valves | 1-channel PWM H-bridge pre-driver Small package, various fault detection functions |
AEC-Q100 qualified | |
HTSSOP48-P-300-0.50 | ±1.0 A | BATT | EPS, electric power brake, seat belt pretensioners, auto sunroof, electric sliding doors, power windows, electric power seats, etc. | 1-channel H-bridge pre-driver (ext. N-ch FET) Built-in motor current detection circuit |
AEC-Q100 qualified | |
P-LQFN40-0606-0.50-001 | ±5.0 A (10 A/1-channel mode) |
BATT | Open/close control for engine throttle, Motor drive system that requires PWM control, such as door latch | PWM-type, 5A dual-channel, H-bridge/1-channel 10A H-bridge driver, Small heat dissipation package, various falt detection functions, SPI communication (motor control enabled) | AEC-Q100 qualified | |
P-VQFN40-0606-0.50-004 | ±5.0 A (10 A/1-channel mode) |
BATT | Open/close control for engine throttle, Motor drive system that requires PWM control, such as door latch | PWM-type, 5A dual-channel, H-bridge/1-channel 10A H-bridge driver, Small package, various falt detection functions, SPI communication (motor control enabled) | AEC-Q100 qualified | |
SSOP24-P-300-0.65A | ±0.3 A | BATT (built-in 5-V regulator) |
HVAC actuator control | 1-channel H-bridge driver LIN 1.3 slave | – | |
LQFP48-P-0707-0.50C | ±1.0 A | BATT | EPS, electric power brake, seat belt pretensioners, auto sunroof, electric sliding doors, power windows, electric power seats, etc. | 1-channel H-bridge pre-driver (ext. N-ch FET) Built-in motor current detection circuit, built-in motor rotation direction detection |
AEC-Q100 qualified | |
SSOP24-P-300-0.65A | ±0.3 A | BATT (built-in 5-V regulator) |
HVAC actuator control | Built-in 1ch H-bridge, communicate with LIN 2.0 master, as a slave IC | AEC-Q100 qualified |
|
SSOP24-P-300-0.65A | ±1.0 A | BATT | HVAC damper control, door mirror angle control, etc. | 2-channel H-bridge driver DMOS power transistor version of the TA8083FG |
AEC-Q100 qualified | |
SSOP24-P-300-0.65A | ±1.0 A | BATT | HVAC damper control, door mirror angle control, etc. | 6-channel half-bridge driver SPI interface |
AEC-Q100 qualified |
Product | File Type | PSpice Download | Motor Type | Output Voltage (V) | Output Current (A) | Features | Publish Date |
---|---|---|---|---|---|---|---|
TB9051 | zip | (36KB) | Brushed DC | 28 | 6 | PWM type single channel H-bridge DC brushed motor driver for automotive use | 2017/10/30 |
線上庫存查詢跟購買
型號需要超過三個文字以上
* PSpice® is a registered trademark of Cadence Design Systems, Inc.
* Other company names, product names, and service names may be trademarks of their respective companies.