型號查詢

交叉搜尋

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

關鍵字搜尋

參數搜尋

線上庫存查詢跟購買

Select Product Categories

Evaluation board for motor pre-driver IC and external FET drive board

Block Diagram
Block Diagram

Description

  • Evaluation board of pre-driver IC (TC78B009FTG/TC78B027FTG) for 3 phase brush-less DC motor and external FET drive board.
  • FET drive board consists of PCB, 6 MOSFETs and right angle connector (board to board connector).
  • FET drive board is connected with the evaluation board of TC78B009FTG/TC78B027FTG by a right angle connector.

Features

  • The kind of MOSFET which can be mounted on the top side and the bottom side of the PCB is different, and it corresponds to two kinds of MOSFET packages (Top: TSON Advance, Bottom: UDFN6B). 
    (TSON Advance: TPN11003NL/TPN8R903NL etc., UDFN6B: SSM6K513NU/SSM6K504NU etc.)
  • Only by mounting 6 MOSFETs and right angle connector on the PCB, it is possible to connect to the evaluation board of TC78B009FTG/TC78B027FTG.

Reference design files

Design, Document

“Design・Document” contains the documents listed below.

Design, File

“Design・File” contains the contents listed below.

Name Date

Toshiba items

Part number

Description

TC78B009FTG

  • 3-phase brushless motor control pre-driver IC
  • Eliminating the Hall sensors allows reduction of mounting area and cost of IC, also contributing to motor downsizing and cost reduction.
  • Closed loop speed control allows stable rotational speed under load variations, without using external MCUs.
  • Various external FETs can be used since FET gate current can be configured using the internal non-volatile memory (NVM).

TC78B027FTG

  • 3-phase brushless motor control pre-driver IC
  • Intelligent Phase Control, a technology developed by Toshiba Electronic Devices & Storage Corporation ("Toshiba"), realizes an automatically optimized high-efficiency drive in a wide range of rotational speeds.
  • Closed loop speed control allows stable rotational speed under load variations, without using external MCUs.
  • Various external FETs can be used since FET gate current can be configured using the internal non-volatile memory (NVM).

聯繫我們

技術方面問題

聯絡我們

聯絡我們

常見問題

常見問答
開啟新視窗