Function to suppress inrush current

Function to suppress inrush current

When the output is turned on, the charging current flows through the output capacitor. If this current is too large, the overcurrent protection circuit may malfunction, making it impossible to start up, or the output voltage may overshoot. This function restricts the current flowing through the output capacitor to prevent this. Toshiba eFuse IC can reduce the inrush current by using an adjustable slew rate control function with an external capacitance.

The larger the output capacitor and the higher the input voltage, the higher the inrush current. This large inrush current may cause failure. In that case, it is effective to keep the inrush current low by the slew rate control function.Our eFuse IC can adjust the slew rate of the output voltage with a small external capacitance, which simplifies the design of circuits that suppress the inrush current.

eFuse ICs

Products list (parametric search)

Related information

Back to eFuse ICs

聯繫我們

技術方面問題

聯絡我們

聯絡我們

常見問題

常見問答

Queries about purchasing, sampling and IC reliability

線上庫存查詢跟購買

型號需要超過三個文字以上

keyword:

Disclaimer for External Link
Through this website you are able to proceed to the website of our distributors ("Third Party Website") which is not under the control of Toshiba Corporation and its subsidiaries and affiliates (collectively "Toshiba"). The Third Party Website is made available to you as a convenience only and you agree to use the Third Party Website at your own risk. The link of the Third Party Website does not necessarily imply a recommendation or an endorsement by Toshiba of the Third Party Website. Please be aware that Toshiba is not responsible for any transaction done through the Third Party Website, and such transactions shall be subject to terms and conditions which may be provided in the Third Party Website.
開啟新視窗