型號查詢

交叉搜尋

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

關鍵字搜尋

參數搜尋

線上庫存查詢跟購買

DIY Car: Build Guide using TB67H450FNG

DIY Car build guide using the evaluation board of brushed DC motor driver IC TB67H450FNG. It describes components used, block diagram, software configuration, etc.

Block diagram of DIY Car: Build Guide using TB67H450FNG.
Block diagram

Description

TB67H450FNG PWM Chopper Type DC Brushed Motor Driver
System power supply 5V Li-ion battery
Motor specifications General use brushed DC motor
MCD Board TB67H450FNG Evaluation Board (MIKROE-3982)
MCD control method PWM Control (Arduino Nano is used for controlling system and generating PWM signals.)

Features

  • Design Guide for DIY Car based on general motor driver IC TB67H450FNG.
  • By individually controlling the drive wheel motors (left and right), various patterns of operation are realized.
  • Arduino Nano is used as microcontroller board for controlling operation.
Images of DIY Car: Build Guide using TB67H450FNG.

Reference design files

Design, Document

“Design・Document” contains the documents listed below.

名稱 日期

Toshiba items

Part Number Device Category Portion Usage Description
TB67H450FNG Brush Motor Driver IC 2 pcs TB67H450FNG is a PWM chopper type DC brushed motor driver IC.
Fabricated with the BiCD process, the TB67H450FNG is rated at 50V output voltage with maximum current of 3.5A.

聯繫我們

技術方面問題

聯絡我們

聯絡我們

常見問題

常見問答
開啟新視窗