型號查詢

交叉搜尋

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

關鍵字搜尋

參數搜尋

線上庫存查詢跟購買

Select Product Categories

What is a break-before-make circuit?

break-before-make circuit

There are load switch ICs incorporating two switches. After the load switch IC “breaks” one switch, the break-before-make circuit keeps two switches off until it “makes” the other switch. This prevents two voltage domains from being short-circuited during the changeover between two switches.

To perform a parametric search of load switch ICs with a break-before-make circuit, click:

Other load switch ICs:

開啟新視窗