This webpage doesn't work with Internet Explorer. Please use the latest version of Google Chrome, Microsoft Edge, Mozilla Firefox or Safari.
型號需要超過三個文字以上
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
型號需要超過三個文字以上
This reference design provides design guide, data and other contents of Over Temperature Detection IC ThermoflaggerTM Application Circuits (TCTH021AE / Push-pull type). In combination with PTC thermistor(s), the ThermoflaggerTM can be used to detect over temperature at multiple locations within a device. Details of other application circuits of the ThermoflaggerTM are also provided.
Click on components for more details
Circuit topology | Over Temperature Detection IC ThermoflaggerTM Application Circuit |
---|---|
Circuit | Over Temperature Detection Circuit, Light Detection Circuit, Pressure Detection Circuit |
設計・文件 包含以下文件。
設計數據包含以下內容。
器件型號 | 器件目錄 | 使用部位・數量 | 說明 |
---|---|---|---|
Over Temperature Detection IC | Detection IC・1 | 10 μA, Push-pull, Over temperature detection IC | |
Small-signal MOSFET | Low side switch・1 | N-ch MOSFET, 20 V, 0.18 A, 3.0 Ω@4V, SOT-723(VESM) | |
Small-signal MOSFET | High side switch・1 | P-ch MOSFET, -20 V, -0.25 A, 1.4 Ω@4.5V, SOT-723(VESM) |