-
My ToshibaSemicon
- 網站首頁 檢視
-
半導體 檢視
-
應用
Body Electronics
xEV
In-Vehicle Infotainment
Advanced Driver-Assistance Systems (ADAS)
Chassis
Infrastructure
BEMS/HEMS
Factory Automation
Commercial Equipment
IoT Equipment
Healthcare
Wearable Device
Mobile
Computer Peripherals
-
產品
-
開發/設計支援
-
技術知識
- 購買管道 檢視
-
- 儲存產品 檢視
- 公司資訊 檢視
- 型號查詢
- 交叉搜尋
- 關鍵字搜尋
- 參數搜尋
- 線上庫存查詢跟購買
This webpage doesn't work with Internet Explorer. Please use the latest version of Google Chrome, Microsoft Edge, Mozilla Firefox or Safari.
型號需要超過三個文字以上
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
型號需要超過三個文字以上
Open-Loop Control
A stepping motor can be controlled easily because a feedback circuit is not required.
Non-stepping motors require feedback to determine the rotor position, in particular when you want them to be driven to a specific position. Stepping motors do not require such feedback, because they simple execute a number of steps.
* MCU: Microcontroller
- 1/7
- Next
