Low Power Consumption Control Block

Low Power Consumption Control Block

TX03 series microcontrollers control the low power consumption mode by using a Clock Generator block (CG block) that controls the clock supply and the external interrupt signal.

  • In low power consumption mode control, the standby operation mode including clock supply and clock stop is controlled.
  • It converts the external interrupt signal to the high active signal and requests an interrupt.
    5 interrupt signal types (High, Low, Rising edge, Falling edge, and Both edges) can be supported.

Chapter 3 Peripheral Circuits

Low Power Consumption Technology
詳細資料
Low Power Consumption Mode (1)
詳細資料
Low Power Consumption Mode (2)
詳細資料
Peripheral Circuits by Group of TX3
詳細資料
Peripheral Circuits of the M320 Group
詳細資料
M320 Group Application Example
詳細資料
Peripheral Circuits of the M330 Group
詳細資料
M330 Group Application Example (1)
詳細資料
M330 Group Application Example (2)
詳細資料
Peripheral Circuits of the M340 Group
詳細資料
M340 Group Application Example
詳細資料
Peripheral Circuits of the M360 Group
詳細資料
M360 Group Application Example
詳細資料
Peripheral Circuits of the M390 Group
詳細資料
M390 Group Application Example
詳細資料
Peripheral Circuits of the M370 Group
詳細資料
M370 Group Application Example
詳細資料
Overview of Vector Engine (VE)
詳細資料
Peripheral Circuits of the M380 Group
詳細資料
M380 Group Application Example (1)
詳細資料
M380 Group Application Example (2)
詳細資料

* Arm and Cortex are registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere.

Back to TX03 Series Microcontrollers

開啟新視窗