This webpage doesn't work with Internet Explorer. Please use the latest version of Google Chrome, Microsoft Edge, Mozilla Firefox or Safari.
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
TCD2726DG meets the demand by improving the performance with the 100 MHz (50 MHz x 2 ch) data rate, against the 70 MHz (35 MHz x 2 ch) data rate of Toshiba’s current sensor.
To prevent increased electromagnetic interference (EMI), a negative side effect of a faster clock rate, the new sensor incorporates a timing generator circuit and has a lower CCD driver pin count. This reduces EMI- and timing-adjustment work for customers, and the number of peripheral parts, contributing to easier system development.
 10 V power supply is used partially. Dual power supply of 3.3 V and 10 V.
|Effective number of Image Sensing Elements||7500 elements by 3 lines|
|Image Sensing Element Size||4.7 μm × 4.7 μm|
|Power Supply||AVDD, DVDD, CKDVDD : 3.1 V to 3.5 V
VDD10 : 9.5 V to 10.5 V
|Data rate||100 MHz (50 MHz × 2 ch)|
|Package||32 PIN CERDIP|
|Package Size||53.60 mm (L) × 9.65 mm (W)|
|Function||Timing Generator circuit, CCD driver|