This webpage doesn't work with Internet Explorer. Please use the latest version of Google Chrome, Microsoft Edge, Mozilla Firefox or Safari.
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
This reference design provides design guide, data and other contents of 100 W LLC DC-DC Converter which uses Zero Volt Switching implemented using LLC resonance.
|Input voltage||DC 22.8 to 25.2 V|
|Output voltage||DC 12 V|
|Output power||100 W|
|Circuit topology||LLC Resonance + Synchronous Rectification Circuit|
“Design・Document” contains the documents listed below.
“Design・File” contains the contents listed below.
*1：Actual PCB was designed on CR5000BD. The other files were made from CR5000BD file.
*2：The data was generated on CR5000BD.
|Part Number||Device Category||Portion Usage||Description|
|TPN7R504PL||MOSFET||Primary-side main switch・2||40 V/7.5 mΩ (max) @VGS = 10 V/TSON Advance|
|TPH1R204PL||MOSFET||Secondary-side・2||40 V/1.24 mΩ (max) @VGS = 10 V/SOP Advance|
|TLP785-GR||Photo Coupler||Output voltage feedback・2||DC input/Transistor output/BVS = 5000 Vrms (min)/DIP4(TLP785)|
* Cadence, the Cadence logo, OrCAD and OrCAD logo are trademarks or registered trademarks of Cadence Design Systems, Inc.
* Other company names, product names, and service names may be trademarks of their respective companies.