This webpage doesn't work with Internet Explorer. Please use the latest version of Google Chrome, Microsoft Edge, Mozilla Firefox or Safari.
型號需要超過三個文字以上
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
型號需要超過三個文字以上
This reference design provides design guide, data and other contents of 1 kW server power supply using phase shifetd full-bridge DC-DC converter.
輸入電壓 | DC 38.5 至 60 V |
---|---|
輸出電壓 | DC 24 V |
輸出功率 | 10 至 200 W |
電路拓撲 | 主動式鉗位順向+同步整流 |
“設計・文件”包含以下文件。
“設計・文件”包含以下文件。
*1:實際PCB在CR5000BD上設計。其他文件由CR5000BD文件生成。
*2:資料在CR5000BD上生成。
元件型號 |
元件目錄 | 部位・數量 |
說明 |
---|---|---|---|
TPH3300CNH | MOSFET | Primary-side main switch・1 | 150 V/33 mΩ (max) @VGS = 10 V/SOP Advance |
TPN5900CNH | MOSFET | Primary-side clamp switch・1 | 150 V/59 mΩ (max) @VGS = 10 V/TSON Advance |
TPH9R00CQH | MOSFET | Secondary-side・4 | 150 V/9.0 mΩ (max) @VGS = 10 V/SOP Advance |
TLP785(GR | Photocoupler | Output voltage feedback・1 | DC input/Transistor output/BVS = 5000 Vrms (min)/DIP4(TLP785) |
* Cadence, the Cadence logo, OrCAD and OrCAD logo are trademarks or registered trademarks of Cadence Design Systems, Inc.
* Other company names, product names, and service names may be trademarks of their respective companies.