Asia-Pacific
English
简体中文
繁體中文
한국어
日本語
Americas
English
Europe (EMEA)
English



型號查詢

交叉搜尋

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

關鍵字搜尋

參數搜尋

線上庫存查詢跟購買

選擇應用

Find everything you need for your next product design. Simply select an application and click through to the block diagram to discover our semiconductor solutions.

新產品/新聞

Why are two MOSFETs used in series in the Lithium-ion secondary battery protection circuit?

In order to achieve the charge-discharge function, two MOSFETs are used as shown in Figure 1.

The case of only one MOSFET is used as shown in Figure 2, even if the MOSFET is turned off, reverse current of MOSFET flow through the body diode in discharge of Lithium-ion secondary battery.
This case will not be a function as a charge-discharge switch.

充放電機能を実現するために、このように2個のMOSFETを使用しております。
MOSFETを1個だけ使用した場合、充放電スイッチとしては機能しません。