This webpage doesn't work with Internet Explorer. Please use the latest version of Google Chrome, Microsoft Edge, Mozilla Firefox or Safari.
About information presented in this cross reference
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application. Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected. TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
LDO Regulator TCR15AG (fixed output voltage type) Application & Circuit
This reference design provides document with PSRR, dynamic response and controlling output voltage.The LDO has very small package and fixed output voltage for consumer application.
Ultra small package WCSP6F (0.8 mm x 1.2 mm (typ.), t: 0.33 mm (max))
Wide range output voltage (0.65 V to 3.6 V)
Fast load transient response -100 / +115 mV (typ.)@ 0.01 A⇔1.5 A, COUT = 4.7 μF
High ripple rejection ratio 95 dB (typ.)@1 kHz
Overcurrent protection function
Thermal shutdown function
Inrush current reduction function ( output voltage soft start )
Under voltage lockout function: 0.5 V (typ.)
The TCR15AG series are available in capable of driving up to 1.5 A, these devices are ideal for portable applications that require high-density board assembly such as cellular phones.
This voltage regulators are fixed output voltage type and have 46 output voltage linups from 0.65 V to 3.6 V.
As small ceramic input and output capacitors can be used with the TCR15AG series.